Note: Import from IPICO only available in CC/RR Module
Note: Interface for Button Finish Timing required
  1. Go to Set-up > CC/RR Button Finish Interface, select IPICO Sports Chip Timing
  2. Go to Run > CC/RR > Interfaces > CC/RR Button Timer - IPICO > Change Data Directory
  3. Select location of IPICO files
User-added image
  1. Click OK
  2. Go to Assignments > Manage IPICO Chip ID's > Read Chip File
  3. Select text file with Chip ID's
  4. Click Save
  5. Go to Times > Read Times
  6. Select correct file
  7. Click OK
  8. Enter
    1. Event Date
    2. Hour (0 to 23)
    3. Minute (0 to 59)
    4. Seconds (0 to 59)
    5. Hundredths (0 to 99)
    6. Click OK
    • Note: Above information is for start time of race.  IPICO times are offset from start time